Weintek USA

Weintek Love in the Wild

Submit your testimonial
Metroid Electrical Engineering
Control panel for the equipment upgrade of an existing waterplay area at a riverside park in regional QLD. IT features Schneider Electric switchgear and a Weintek HMI. The board provided control and water treatment to 3 key areas: - The "Water Stream" region, where water is pumped into a boat feature and trickling down through a concrete stream. - "Splashpad" region, where water is pumped into a series of jumping and cascade jets, draining to a perimeter strip drain. - "Wreck Pool" region, where water is pumped into a shallow pool through eyeballs in one wall, draining through to an overflow grate. All water then drains to a balance tank where it is then treated and returned to the other end of the tank.
Control panel for the equipment upgrade of an existing waterplay area at a riverside park in regional QLD. IT features Schneider Electric switchgear and a Weintek HMI. The board provided control and water treatment to 3 key areas: - The "Water Stream" region, where water is pumped into a boat feature and trickling down through a concrete stream. - "Splashpad" region, where water is pumped into a series of jumping and cascade jets, draining to a perimeter strip drain. - "Wreck Pool" region, where water is pumped into a shallow pool through eyeballs in one wall, draining through to an overflow grate. All water then drains to a balance tank where it is then treated and returned to the other end of the tank.

Ahmad Farobi Abdurrohim

Fresh Graduate of Power Plant Engineering Technology Applied Major | Internship at PT. Paiton Operation & Maintenance Indonesia (POMI) | Renewable Energy, Electrical, Gas, Oil and Mining Enthusiast

Water Cooled Chiller System by PLC (Programmable Logic Controller) Omron and operated via HMI (Human-Machine Interface) Weintek The objective of this project is the design and implementation of a SCADA (Supervisory Control and Data Acquisition) system for a Water-Cooled Chiller System through the integration of industrial-grade hardware and software. The system models the air cooling process via water circulation, managed by an Omron PLC and operated through a Weintek HMI. Real-time monitoring is facilitated by an OPC UA server and client framework, with supporting software including CX-Programmer, KEPServerEX, and EasyBuilder. The developed system has been successfully realized with features of automated control, real-time monitoring, and dependable fault management. The seamless integration of PLC, HMI, and OPC UA illustrates the efficiency of SCADA technology in industrial cooling applications. The project underscores the critical role of integrated system design in enhancing energy performance and ensuring operational reliability.
Water Cooled Chiller System by PLC (Programmable Logic Controller) Omron and operated via HMI (Human-Machine Interface) Weintek The objective of this project is the design and implementation of a SCADA (Supervisory Control and Data Acquisition) system for a Water-Cooled Chiller System through the integration of industrial-grade hardware and software. The system models the air cooling process via water circulation, managed by an Omron PLC and operated through a Weintek HMI. Real-time monitoring is facilitated by an OPC UA server and client framework, with supporting software including CX-Programmer, KEPServerEX, and EasyBuilder. The developed system has been successfully realized with features of automated control, real-time monitoring, and dependable fault management. The seamless integration of PLC, HMI, and OPC UA illustrates the efficiency of SCADA technology in industrial cooling applications. The project underscores the critical role of integrated system design in enhancing energy performance and ensuring operational reliability.

Faisal Ali

Automation Department

Successfully completed the Weintek CMT Series HMI project at Sapphire Diamond & Finishing The project involved complete HMI design, communication setup, and system integration — ensuring smooth monitoring and control of industrial operations.
Successfully completed the Weintek CMT Series HMI project at Sapphire Diamond & Finishing The project involved complete HMI design, communication setup, and system integration — ensuring smooth monitoring and control of industrial operations.

Andy Eka

Automation Machine Manufactures

Cup Filling Sealing 16 line Production speed up to 21,000 cups/hour with a power of 16 kW.
Cup Filling Sealing 16 line Production speed up to 21,000 cups/hour with a power of 16 kW.

Enes Taşdemir

Panel Testing & Commissioning Specialist ⚙️ | Master Touch in LV Systems

🔹 Data Center | Generator Synchronization & Transfer Control Panels 🔹 Not just a panel project… The heart of critical infrastructure. 📌 What did we do? • Designed 2 Master Panels (MAS 1 & MAS 2) to ensure the continuity of the data center’s power supply. • Independent generator groups are controlled through these panels, providing full redundancy. • Every detail executed with uncompromising quality: • PLC: Siemens • Control: DEIF • Circuit Breakers: ABB & Schneider • Relays: Schneider & Phoenix Contact • Terminal Blocks: WAGO • Push Buttons: Schneider • HMI Panel: Weintek • As İksel Elektromekanik team, we completed the manufacturing, assembly, labeling, and wiring with long hours of dedicated work. 📌 Result: A fully functional, dual master panel system with complete synchronization and transfer capability, delivering high reliability. ⚡ The MAS panels you see here are not just control panels; they are the outcome of team spirit + quality engineering + world-class components combined.
🔹 Data Center | Generator Synchronization & Transfer Control Panels 🔹 Not just a panel project… The heart of critical infrastructure. 📌 What did we do? • Designed 2 Master Panels (MAS 1 & MAS 2) to ensure the continuity of the data center’s power supply. • Independent generator groups are controlled through these panels, providing full redundancy. • Every detail executed with uncompromising quality: • PLC: Siemens • Control: DEIF • Circuit Breakers: ABB & Schneider • Relays: Schneider & Phoenix Contact • Terminal Blocks: WAGO • Push Buttons: Schneider • HMI Panel: Weintek • As İksel Elektromekanik team, we completed the manufacturing, assembly, labeling, and wiring with long hours of dedicated work. 📌 Result: A fully functional, dual master panel system with complete synchronization and transfer capability, delivering high reliability. ⚡ The MAS panels you see here are not just control panels; they are the outcome of team spirit + quality engineering + world-class components combined.

Pentagon Industrial Automation

Synchronisation,Registration, Inspection,and digitalization in converting

Retrofitting Project Pelican Solventless Lamination machine We congratulate to our Team. Machine Details Machine make - Pelican India Machine speed- 350MPM VFD used in Automation- Siemens CPU - Siemens Hmi - weintek
Retrofitting Project Pelican Solventless Lamination machine We congratulate to our Team. Machine Details Machine make - Pelican India Machine speed- 350MPM VFD used in Automation- Siemens CPU - Siemens Hmi - weintek

Background-Summer-59
It's easybuilder pro. Sign up on their account. It's actually not a bad HMI on the cheap. And their weincloud is super nice.
It's easybuilder pro. Sign up on their account. It's actually not a bad HMI on the cheap. And their weincloud is super nice.

3647
I’ve had very good experiences with Weintek, must just be what you’re used to. From the budget HMI perspective I (personally) have yet to use something better. Their software is really robust and easy to use, multiple times a week they push updates to it fixing bugs and adding new features, I’ve never experienced support like that from Mitsubishi or Rockwell.
I’ve had very good experiences with Weintek, must just be what you’re used to. From the budget HMI perspective I (personally) have yet to use something better. Their software is really robust and easy to use, multiple times a week they push updates to it fixing bugs and adding new features, I’ve never experienced support like that from Mitsubishi or Rockwell.

Significant_Ball_103
Its called easybuilder PRO… A very good software for HMI programming!

jpiro12
We have liked the easy access connectivity and have used it on many applications.

Enes Taşdemir

Panel Testing & Commissioning Specialist ⚙️

⚡ Synchronization panel FAT result: ZERO errors! I personally carried out all wiring, labeling, control connections and pre-testing of a 5-generator synchronization panel. 🔍 The outcome: Every single check by the client's engineers passed with flawless approval. 👷 ♂️ Coming from the workshop floor, I don't just "build panels." I deliver each project as a signature of craftsmanship and expertise. 💡 Symmetry in cable ducts, precision in connections, accuracy in testing... These are not coincidences, but the result of respect for my profession. 🔧 Technology + Craftsmanship: • DEIF – Synchronization & control • Schneider Electric – Switchgear equipment • Phoenix Contact – Terminals & accessories • Enko – Rectifier • EAE – Panel body • Siemens – PLC • Weintek – HMI screen 🏆 For me, success isn't about "it works." Success is delivering projects that are flawless, reliable and impressive. 😉 In short: Quality hides in the details, and I delivered it with zero errors.
⚡ Synchronization panel FAT result: ZERO errors! I personally carried out all wiring, labeling, control connections and pre-testing of a 5-generator synchronization panel. 🔍 The outcome: Every single check by the client's engineers passed with flawless approval. 👷 ♂️ Coming from the workshop floor, I don't just "build panels." I deliver each project as a signature of craftsmanship and expertise. 💡 Symmetry in cable ducts, precision in connections, accuracy in testing... These are not coincidences, but the result of respect for my profession. 🔧 Technology + Craftsmanship: • DEIF – Synchronization & control • Schneider Electric – Switchgear equipment • Phoenix Contact – Terminals & accessories • Enko – Rectifier • EAE – Panel body • Siemens – PLC • Weintek – HMI screen 🏆 For me, success isn't about "it works." Success is delivering projects that are flawless, reliable and impressive. 😉 In short: Quality hides in the details, and I delivered it with zero errors.

Deka Perlanda

Assistant Manager Engineering - Electrical & Automation at Mewah Group

"As long as you are still breathing, forever you still have to keep learning💪🏻" The next automation project, thank God for success✊🏻 Big Thanks to ADS team-Muaro Jambi🤝 #Siemens #Weintek #Automation #Engineering
"As long as you are still breathing, forever you still have to keep learning💪🏻" The next automation project, thank God for success✊🏻 Big Thanks to ADS team-Muaro Jambi🤝 #Siemens #Weintek #Automation #Engineering

Guillermo Abrain

Gerente y Programador en ADISA-PROYECTOS.

Adisa-Proyectos delivers two filtration plants for different customers, with the control of the installation carried out entirely on a remote SOFREL plant. The novelty, in our case, is that a control PLC (Siemens or Schneider) is not installed, but the remote itself does all the sequencing and management of the installation (Auto/Man, Sequences, Mov. Manuals, Instructions, alarms, etc.). ✔️ S4W Remote. ✔️ Weintek HMI. ✔️ PCWIN2 control center. In addition, taking advantage of the fact that all the information is taken to a PCWIN2 and that the weintek HMI has a webserver, the HMI screen is embedded in the PCWIN2.
Adisa-Proyectos delivers two filtration plants for different customers, with the control of the installation carried out entirely on a remote SOFREL plant. The novelty, in our case, is that a control PLC (Siemens or Schneider) is not installed, but the remote itself does all the sequencing and management of the installation (Auto/Man, Sequences, Mov. Manuals, Instructions, alarms, etc.). ✔️ S4W Remote. ✔️ Weintek HMI. ✔️ PCWIN2 control center. In addition, taking advantage of the fact that all the information is taken to a PCWIN2 and that the weintek HMI has a webserver, the HMI screen is embedded in the PCWIN2.

Emerson Javier Aldas Lopez

Electronics and Automation Engineer. Master’s Student in Process Management and Automation. Power Generation Maintenance Engineer.

🚀 Smart Monitoring Center: Connecting Generation in Real Time Key advance in the project: Intelligent Monitoring Center, designed to integrate and supervise in real time the Cumbayá, Nayón, Pasochoa, Guangopolo, Gualberto Hernández Thermal Power Plant (broker) and soon the Hidrovictoria Power Plant. The system is based on advanced Weintek model cMT-FHDX-820 HMI devices, programmed with macros in C language for the calculation and processing of production and consumption data. In addition, the graphical interface was developed in Easy Builder Pro and the information was taken from a Quantum Shcneider PLC in each plant. Each central is connected through a WAN network, sending its critical variables to a central node, and all the information is stored and visualized on the WeinCloud web platform, through executive dashboards. 🔹 Key Benefits: ✅ Real-time monitoring of critical electrical and mechanical parameters. ✅ Centralized and remote management of operational information. ✅ Greater resilience and continuity of the electricity system. ✅ Optimized daily and monthly reports in the cloud. ✅ Preparation for a scalable, digital and sustainable model. The integration of state-of-the-art hardware, specialized programming, and cloud platforms paves the way for more efficient, secure, and reliable energy management. 🌍⚡
🚀 Smart Monitoring Center: Connecting Generation in Real Time Key advance in the project: Intelligent Monitoring Center, designed to integrate and supervise in real time the Cumbayá, Nayón, Pasochoa, Guangopolo, Gualberto Hernández Thermal Power Plant (broker) and soon the Hidrovictoria Power Plant. The system is based on advanced Weintek model cMT-FHDX-820 HMI devices, programmed with macros in C language for the calculation and processing of production and consumption data. In addition, the graphical interface was developed in Easy Builder Pro and the information was taken from a Quantum Shcneider PLC in each plant. Each central is connected through a WAN network, sending its critical variables to a central node, and all the information is stored and visualized on the WeinCloud web platform, through executive dashboards. 🔹 Key Benefits: ✅ Real-time monitoring of critical electrical and mechanical parameters. ✅ Centralized and remote management of operational information. ✅ Greater resilience and continuity of the electricity system. ✅ Optimized daily and monthly reports in the cloud. ✅ Preparation for a scalable, digital and sustainable model. The integration of state-of-the-art hardware, specialized programming, and cloud platforms paves the way for more efficient, secure, and reliable energy management. 🌍⚡

Alvaro Arrillaga

Ingeniero en Automatizacion Industrial

Programming Weintek MT8100IE screen

Mohamed Mansy

Mechatronics Engineer | Mechanical Design | Automation and Control

🔹 Engineering the Nitrogen Skid Unit – Power Meets Intelligence One of the most exciting projects I’ve worked on at HydroSERV was the Skid Nitrogen Pumping Unit – a system that combines mechanical power, safety, and smart automation in one compact design. These units are capable of delivering nitrogen at pressures up to 10,000 PSI and flow rates up to 180,000 SCFH, and they are essential in: ✅ Well servicing & intervention ✅ Pipeline & valve pressure testing ✅ Purging & blanketing to prevent oxygen/moisture ✅ Drying operations for tanks & pipelines ✅ Inerting in refineries & chemical plants ⚙️ Key Components of the Unit: High-Pressure Pump – delivers nitrogen reliably at extreme pressures. Vaporizer System – converts liquid nitrogen into usable gas. Detroit Diesel Engine – the driving power of the unit. Storage & Piping System – safe distribution and flow handling. Skid Frame – a compact, mobile structure I designed in SolidWorks to house and protect all equipment. 🔧 My Contribution – Where Mechatronics Comes Alive: Mechanical Design: Created the Skid Frame and drafted precision components like the IN-2 Plunger Clamp, ensuring manufacturability and accuracy. Automation & Control: Installed and wired pressure, flow, and temperature sensors directly to the PLC. Built a jack (junction) box to organize and simplify the control circuit. Integrated a DC–DC power converter, terminal blocks, fuses, and relays for safe and stable operation. Connected the Detroit Diesel engine control panel with the automation system. Programmed a Weintek HMI, giving operators an easy interface for: Live monitoring of pressure, flow, and temperature Alarms and safety interlocks Calibration and data logging
🔹 Engineering the Nitrogen Skid Unit – Power Meets Intelligence One of the most exciting projects I’ve worked on at HydroSERV was the Skid Nitrogen Pumping Unit – a system that combines mechanical power, safety, and smart automation in one compact design. These units are capable of delivering nitrogen at pressures up to 10,000 PSI and flow rates up to 180,000 SCFH, and they are essential in: ✅ Well servicing & intervention ✅ Pipeline & valve pressure testing ✅ Purging & blanketing to prevent oxygen/moisture ✅ Drying operations for tanks & pipelines ✅ Inerting in refineries & chemical plants ⚙️ Key Components of the Unit: High-Pressure Pump – delivers nitrogen reliably at extreme pressures. Vaporizer System – converts liquid nitrogen into usable gas. Detroit Diesel Engine – the driving power of the unit. Storage & Piping System – safe distribution and flow handling. Skid Frame – a compact, mobile structure I designed in SolidWorks to house and protect all equipment. 🔧 My Contribution – Where Mechatronics Comes Alive: Mechanical Design: Created the Skid Frame and drafted precision components like the IN-2 Plunger Clamp, ensuring manufacturability and accuracy. Automation & Control: Installed and wired pressure, flow, and temperature sensors directly to the PLC. Built a jack (junction) box to organize and simplify the control circuit. Integrated a DC–DC power converter, terminal blocks, fuses, and relays for safe and stable operation. Connected the Detroit Diesel engine control panel with the automation system. Programmed a Weintek HMI, giving operators an easy interface for: Live monitoring of pressure, flow, and temperature Alarms and safety interlocks Calibration and data logging

INSTELMA

LABELLING MACHINES

⚙️ At INSTELMA, we build our machines exclusively with premium components from world-leading manufacturers such as Siemens, Omron, Schneider Electric, Wago, SICK, Weintek, and others - readily available across the globe. 👍 This approach ensures that every INSTELMA machine is not only built to last, but also easy to service and maintain throughout its lifecycle.
⚙️ At INSTELMA, we build our machines exclusively with premium components from world-leading manufacturers such as Siemens, Omron, Schneider Electric, Wago, SICK, Weintek, and others - readily available across the globe. 👍 This approach ensures that every INSTELMA machine is not only built to last, but also easy to service and maintain throughout its lifecycle.

Furkan Yuce

Electrical Automation Engineer / PLC Programmer

aluminum extrusion press, puller, furnace installation, software and commissioning...

Hunter Harris

Behind every great beer, wine, or spirit is great equipment & software.

Vessel: 400 L still with distillation column. Heating System: 5 × electric heaters with automated control. Temperature Control: Precision temperature monitoring and regulation of product. Flow Measurement: Integrated flow sensor for process monitoring. Volume Measurement: Continuous measurement of total vessel volume. Mixing System: Motorized mixer for homogeneous product processing. Control System: Siemens S7-1200 PLC for process automation. Operator Interface: Weintek HMI for control, monitoring, and visualization.
Vessel: 400 L still with distillation column. Heating System: 5 × electric heaters with automated control. Temperature Control: Precision temperature monitoring and regulation of product. Flow Measurement: Integrated flow sensor for process monitoring. Volume Measurement: Continuous measurement of total vessel volume. Mixing System: Motorized mixer for homogeneous product processing. Control System: Siemens S7-1200 PLC for process automation. Operator Interface: Weintek HMI for control, monitoring, and visualization.

Mohamed Zedan

Head engineer of electric department for RES

Thrilled to share software retrofit & complete upgrade for Reverse Osmosis (RO) plant located in oil field in the Red Sea. The system had a third-party (Turkish) software, caused operational challenges in critical processes such as CIP (Cleaning in Place) and Production. The retrofit provided optimization of different processes and full control of the equupment. ✅ System Highlights: • PLC: Siemens S7-1200 • HMI: Weintek
Thrilled to share software retrofit & complete upgrade for Reverse Osmosis (RO) plant located in oil field in the Red Sea. The system had a third-party (Turkish) software, caused operational challenges in critical processes such as CIP (Cleaning in Place) and Production. The retrofit provided optimization of different processes and full control of the equupment. ✅ System Highlights: • PLC: Siemens S7-1200 • HMI: Weintek

Simon Allen

Control Systems Engineer

Nice week on site. Removal of an old failed control system. New system installed and commissioned successfully. Another happy customer. Tricky bit fitting everything in the same size footprint. Easy 👌 HMI and PLC programmed to keep control and upfront control similar to original for a smooth transition and ease of use for the operators.
Nice week on site. Removal of an old failed control system. New system installed and commissioned successfully. Another happy customer. Tricky bit fitting everything in the same size footprint. Easy 👌 HMI and PLC programmed to keep control and upfront control similar to original for a smooth transition and ease of use for the operators.

Jānis Griķis

An engineer doesn’t think in problems, he thinks in possibilities!

Recently I had the opportunity to work on a project at Vides Acmhainní Centrs. The task was to ensure real-time visibility of shredder operation and achieve greater energy efficiency and productivity. With the new HMI panel, operators can now: ▪️see shredder performance in different modes, ▪️analyze how much time the machine has been running under load, idling, or in downtime, ▪️monitor key parameters such as oil temperature, hydraulic pressure, and other machine data. The result – a clear overview of where energy is used effectively and where it is wasted, helping to improve both efficiency and productivity. Full story (published by ZTF Lāsma) 👉 lnkd.in/djRawMGg
Recently I had the opportunity to work on a project at Vides Acmhainní Centrs. The task was to ensure real-time visibility of shredder operation and achieve greater energy efficiency and productivity. With the new HMI panel, operators can now: ▪️see shredder performance in different modes, ▪️analyze how much time the machine has been running under load, idling, or in downtime, ▪️monitor key parameters such as oil temperature, hydraulic pressure, and other machine data. The result – a clear overview of where energy is used effectively and where it is wasted, helping to improve both efficiency and productivity. Full story (published by ZTF Lāsma) 👉 lnkd.in/djRawMGg

Meisam Zamen

Senior Automation Engineer | Expert in PLC, SCADA, HMI | 10+ Years in General Electrical Engineering And Industrial Control and Automation Systems

Just wrapped up a project where the powerful trio of Siemens S7-1200 PLC, Weintek HMI, and a VEGA radar level sensor came together to create a rock-solid tank level control system. #Automation #ControlSystems #SiemensPLC #WeintekHMI #VEGA #Engineering #Manufacturing
Just wrapped up a project where the powerful trio of Siemens S7-1200 PLC, Weintek HMI, and a VEGA radar level sensor came together to create a rock-solid tank level control system. #Automation #ControlSystems #SiemensPLC #WeintekHMI #VEGA #Engineering #Manufacturing

Roy Johnson

Sales and sales leadership trainer and coach.

I always liked Weintek stuff very nicely screwed together.

Ufuk Akinci

Foreman at Panplast Irrigation

Pump control system with Fatek PLC and Weintek HMI

Joe Anderson

PLC programming, HMI screen design, Automation & Electronics. 20+ years doing and teaching

Super useful tool built into Easybuilder Pro software, for Weintek HMI screens.

Harris Mukhtar

Robotics & IoT Enthusiast | Exploring AI | Power Electronics | Nanotechnology | Robot Operating System (ROS) | Industrial Automation | Circuit & PCB Designing.

🚀 Excited to share one of my recent automation projects! I successfully automated a Liquid Filling and Cap Sealing Machine using a Fatek PLC and Weintek HMI. Additionally, I wrote a custom macro in Weintek HMI to integrate with the BC105 Thermal Printer, enabling automatic printing of batch parameters. 📄 Now, whenever a batch is completed, operators can simply press a button on the HMI and the machine will instantly print the parameters. ✅ This ensures complete transparency – eliminating any possibility of manipulation. ✅ Operators and management can instantly verify whether the batch meets requirements or if there are any shortcomings according to the machine’s performance. 💡 The most rewarding part? I was able to deliver this entire project within just 2 days– meeting both the technical and time-sensitive demands of the client. This project was developed for a pharmaceutical company, where reliability, accuracy, and compliance are absolutely critical.
🚀 Excited to share one of my recent automation projects! I successfully automated a Liquid Filling and Cap Sealing Machine using a Fatek PLC and Weintek HMI. Additionally, I wrote a custom macro in Weintek HMI to integrate with the BC105 Thermal Printer, enabling automatic printing of batch parameters. 📄 Now, whenever a batch is completed, operators can simply press a button on the HMI and the machine will instantly print the parameters. ✅ This ensures complete transparency – eliminating any possibility of manipulation. ✅ Operators and management can instantly verify whether the batch meets requirements or if there are any shortcomings according to the machine’s performance. 💡 The most rewarding part? I was able to deliver this entire project within just 2 days– meeting both the technical and time-sensitive demands of the client. This project was developed for a pharmaceutical company, where reliability, accuracy, and compliance are absolutely critical.

Hammad Tariq

Founder & CEO

Free software that feels like premium software.

Raed Gamal

Automation Control Engineer

Easybuilder Pro , it is the most software for HMI screens

David Meherg

Controls Engineering Supervisor

I have just started playing around with the software. I am shocked at how many features these screens can have

Zeldalovesme21
Only experience I have with them are Weintek HMI’s. We have a couple paired with AB PLC’s. They were super simple to share the tag database and get going communicating.
Only experience I have with them are Weintek HMI’s. We have a couple paired with AB PLC’s. They were super simple to share the tag database and get going communicating.

Reasonable-You865
Try Weintek/Maple HMI. At least they support multiple HMI to talk to PLC via the first HMI

Lucemiro da Silva

Automation Systems Analyst | IoT & CLP Specialist | IHM Programmer | Driving Efficiency and Innovation in Industrial Automation

It really is a great piece of equipment

Barry Theodosi
I have used Weintek products for over 14 years and I have only one word to describe this company, FANTASTIC. The Weintek range of industrial products provide Allen Bradley quality, with a feature set that can match some large-scale SCADA packages, all for a very low cost.
I have used Weintek products for over 14 years and I have only one word to describe this company, FANTASTIC. The Weintek range of industrial products provide Allen Bradley quality, with a feature set that can match some large-scale SCADA packages, all for a very low cost.

John C Jones

Owner at Custom Automation Services

Installed five headless HMIs on factory floor with 5 1080p LED displays. Networked on the factory LAN reading tags from OPC UA server.
Installed five headless HMIs on factory floor with 5 1080p LED displays. Networked on the factory LAN reading tags from OPC UA server.

Kimber Keddy

Kentville Electric & Controls LTD.

Robert Paproski I’m a fan of these 822-SVRX by Weintek as well.

Mike Lee

CEO at Univue Inc.

My first experience with Weintek HMI's was with exactly Maple Systems and Steven Engineering ~15 years ago. There was an older gentleman at STEVEN that walked me through the process of migrating a Mitsubishi HMI to the Weintek HMI5070TH and even helped me write some complex macros. That level of support hooked me on Weintek's HMI's ever since, where now we're using the advanced networking features of the cMT line as an edge device to connect to our cloud servers for near-real-time data logging, analysis & visualization. So getting back to your question, I prefer contacting the manufacturer directly, or a distributor that is highly technical. In this case, both Steven and Maple are very capable sources of support. Sure, I could spend a few hours researching myself, but you just can't beat years of experience and knowledge to kick-start your path. I find that the newer grads have a strong resistance to using this channel, so I let them struggle a bit on their own, then suggest this approach. Manufacturers spend a lot of resources training and grooming their techs, so why not take advantage of them?
My first experience with Weintek HMI's was with exactly Maple Systems and Steven Engineering ~15 years ago. There was an older gentleman at STEVEN that walked me through the process of migrating a Mitsubishi HMI to the Weintek HMI5070TH and even helped me write some complex macros. That level of support hooked me on Weintek's HMI's ever since, where now we're using the advanced networking features of the cMT line as an edge device to connect to our cloud servers for near-real-time data logging, analysis & visualization. So getting back to your question, I prefer contacting the manufacturer directly, or a distributor that is highly technical. In this case, both Steven and Maple are very capable sources of support. Sure, I could spend a few hours researching myself, but you just can't beat years of experience and knowledge to kick-start your path. I find that the newer grads have a strong resistance to using this channel, so I let them struggle a bit on their own, then suggest this approach. Manufacturers spend a lot of resources training and grooming their techs, so why not take advantage of them?

Darwin Thiessen

System Specialist at Diversified Systems LLC

Another HMI Replacement. I recently did another AB Panel View replacement. I tried to replace the internal battery like the error suggested but did not work. This HMI had been greatly modified from the original so it was not in my data base. Using another press program and buying some software was able to extract the tag information needed. Diversified can now replace any older HMI's like the one in the picture or any other outdate ones no longer supported by Allen Bradley. This has the potential for us to grow into almost any industry using Allen Bradley products. Got lucky on this one but if I have the original file can extract tag information for the new Weintek HMI Diversified uses.
Another HMI Replacement. I recently did another AB Panel View replacement. I tried to replace the internal battery like the error suggested but did not work. This HMI had been greatly modified from the original so it was not in my data base. Using another press program and buying some software was able to extract the tag information needed. Diversified can now replace any older HMI's like the one in the picture or any other outdate ones no longer supported by Allen Bradley. This has the potential for us to grow into almost any industry using Allen Bradley products. Got lucky on this one but if I have the original file can extract tag information for the new Weintek HMI Diversified uses.

Darby Kramer, CFPS, CMRP

President and Co-Founder of Dynamic Motion Industries LLC

More ifm flow meter installs by Dynamic Motion Industries LLC! Three SM8001 meters installed on soft water fill piping for our customers steam kettles. These replace obsolete units that were only available on eBay and were costing the customer upwards of $5k/each! The entire install was performed on three stations for less than the cost of two meters, and the controllers were a whole other story! These are on a AL1341 modbus IO master, connected to Rockwell Automation Micro850 controllers and Weintek USA, Inc. cMT displays.
More ifm flow meter installs by Dynamic Motion Industries LLC! Three SM8001 meters installed on soft water fill piping for our customers steam kettles. These replace obsolete units that were only available on eBay and were costing the customer upwards of $5k/each! The entire install was performed on three stations for less than the cost of two meters, and the controllers were a whole other story! These are on a AL1341 modbus IO master, connected to Rockwell Automation Micro850 controllers and Weintek USA, Inc. cMT displays.

Adam Thraves MIET

Controls Engineer

📸 Another recent project controlled using Siemens S71200 and simple HMI application made using Weintek IP series.

Joe Anderson

PLC programming, HMI screen design, Automation & Electronics. 20+ years doing and teaching

PLC program: Automation Direct Ltd Do-More Designer 2.10 Graphics: Weintek Easybuilder Pro HMI software Both free, both full-version, both no-timeout. Great combo #IndustrialAutomation
PLC program: Automation Direct Ltd Do-More Designer 2.10 Graphics: Weintek Easybuilder Pro HMI software Both free, both full-version, both no-timeout. Great combo #IndustrialAutomation

Andrew Young

Senior Engineering Technician at BMI Healthcare

Duncan Stanton I bought our Weintek HMIs from yourselves through a third party, great panels to work with and great value for money 👍🏻😃
Duncan Stanton I bought our Weintek HMIs from yourselves through a third party, great panels to work with and great value for money 👍🏻😃

Guillermo Abrain

Gerente y Programador en ADISA-PROYECTOS.

Finishing the simulation phase with a Treatment Plant client, this time with no major difficulty, but the client required a greater number of operating options so it has been quite complex. ✔️ Siemens S7-1510 PLC. ✔️ Weintek HMI. ✔️ IXON router. ✔️ Remote Access. After this phase, the FAT and SAT tests await us, and finally the commissioning.
Finishing the simulation phase with a Treatment Plant client, this time with no major difficulty, but the client required a greater number of operating options so it has been quite complex. ✔️ Siemens S7-1510 PLC. ✔️ Weintek HMI. ✔️ IXON router. ✔️ Remote Access. After this phase, the FAT and SAT tests await us, and finally the commissioning.

Innovar Controls
Efficient HVAC system management starts with intelligent access to information. With Weintek's WEINCLOUD platform, you can monitor and control your processes in real time, from anywhere and with complete security. Ideal for building and industrial applications, this solution offers intuitive dashboards, integration with PLCs, and data history, ensuring more agility in decision-making and shorter response time for maintenance.
Efficient HVAC system management starts with intelligent access to information. With Weintek's WEINCLOUD platform, you can monitor and control your processes in real time, from anywhere and with complete security. Ideal for building and industrial applications, this solution offers intuitive dashboards, integration with PLCs, and data history, ensuring more agility in decision-making and shorter response time for maintenance.

Filippo Uti

Field service electronic engineer

Weintek Easy Builder Pro. EBpro is an immediate and effective HMI design tool, which I used to solve a problem that appeared on the design of an industrial machine for plastic converting. The integrated automation on EATON plc and Codesys language is a balanced choice for the amount of operations to be carried out. #automation #programming #plc #hmi
Weintek Easy Builder Pro. EBpro is an immediate and effective HMI design tool, which I used to solve a problem that appeared on the design of an industrial machine for plastic converting. The integrated automation on EATON plc and Codesys language is a balanced choice for the amount of operations to be carried out. #automation #programming #plc #hmi

Metroid Electrical Engineering
We recently completed this control switchboard for a swimming centre redevelopment in South Australia. The board provided control to a 50m pool, 25m pool and a Learn To Swim pool. This project featured a 15" Weintek HMI and Siemens PLC, fully programmed and tested inhouse.
We recently completed this control switchboard for a swimming centre redevelopment in South Australia. The board provided control to a 50m pool, 25m pool and a Learn To Swim pool. This project featured a 15" Weintek HMI and Siemens PLC, fully programmed and tested inhouse.

Raed Gamal

A Water & Waste Water Treatment | RO Desalination | Automation Control Engineer| PLC& HMI & SCADA

I installed it in the sewage water treatment plant Because the Weintek HMIs offer several advantages, including a wide range of models and protocols, robust connectivity, user-friendly software, and advanced features like remote access and cloud connectivity.
I installed it in the sewage water treatment plant Because the Weintek HMIs offer several advantages, including a wide range of models and protocols, robust connectivity, user-friendly software, and advanced features like remote access and cloud connectivity.

Metroid Electrical Engineering
Did you know we offer in-house PLC/HMI/SCADA programming customised to your projects requirements? We have experience across all common brands and have programmed over 800 projects. What's the benefit of having in-house programming? Customisation - In-house programming allows for tailored PLC/HMI and SCADA solutions specific to project needs, ensuring better integration with existing systems. Greater Control - Direct control over both hardware and software development leads to higher quality and reliability, reducing the likelihood of errors or miscommunications. Scalability & Flexibility - In-house development teams can quickly scale or adjust the project as requirements evolve, offering more flexibility than outsourced solutions. Long-Term Support - Ongoing support and updates in-house ensures long-term reliability and maintenance, as the same team that designed the system will manage any changes.
Did you know we offer in-house PLC/HMI/SCADA programming customised to your projects requirements? We have experience across all common brands and have programmed over 800 projects. What's the benefit of having in-house programming? Customisation - In-house programming allows for tailored PLC/HMI and SCADA solutions specific to project needs, ensuring better integration with existing systems. Greater Control - Direct control over both hardware and software development leads to higher quality and reliability, reducing the likelihood of errors or miscommunications. Scalability & Flexibility - In-house development teams can quickly scale or adjust the project as requirements evolve, offering more flexibility than outsourced solutions. Long-Term Support - Ongoing support and updates in-house ensures long-term reliability and maintenance, as the same team that designed the system will manage any changes.

José Amador

Independent Mechanical Engineer | Field Diagnostics & Modbus Integration | Commissioning & Technical Training Partner

And once again… Thank you to my clients who trust my professionalism. Practical monitoring applications for practical world 🌎. Put into practice your ideas 💡.
And once again… Thank you to my clients who trust my professionalism. Practical monitoring applications for practical world 🌎. Put into practice your ideas 💡.

Abdul Ahad

Intern

Internship Project Highlight: HMI Design on Weintek MT8071iP During my internship at Industry Innovative Engineers - IIEngineers (iiengineers.com), I had the valuable opportunity to work on designing a Human Machine Interface (HMI) using the Weintek MT8071iP device and EasyBuilder Pro software. As an engineering student passionate about automation and control systems, this project allowed me to explore how HMIs serve as the bridge between operators and industrial hardware. Although the project was not deployed in a live industrial process, it gave me hands-on experience in simulating and building a functional, responsive, and user-friendly interface. Key Skills and Concepts Gained: HMI Design Fundamentals: I learned how to create intuitive layouts, assign system tags, and build screen navigation structures within EasyBuilder Pro. Modbus Communication: I explored how to set up communication between the HMI and simulated PLCs using the Modbus protocol, and understood the role of address mapping. User Experience (UX) for Industry: Special focus was given to designing clear visuals and user workflows suitable for industrial environments. This project gave me a solid introduction to HMI development and deepened my understanding of how operator panels work in manufacturing and process industries.
Internship Project Highlight: HMI Design on Weintek MT8071iP During my internship at Industry Innovative Engineers - IIEngineers (iiengineers.com), I had the valuable opportunity to work on designing a Human Machine Interface (HMI) using the Weintek MT8071iP device and EasyBuilder Pro software. As an engineering student passionate about automation and control systems, this project allowed me to explore how HMIs serve as the bridge between operators and industrial hardware. Although the project was not deployed in a live industrial process, it gave me hands-on experience in simulating and building a functional, responsive, and user-friendly interface. Key Skills and Concepts Gained: HMI Design Fundamentals: I learned how to create intuitive layouts, assign system tags, and build screen navigation structures within EasyBuilder Pro. Modbus Communication: I explored how to set up communication between the HMI and simulated PLCs using the Modbus protocol, and understood the role of address mapping. User Experience (UX) for Industry: Special focus was given to designing clear visuals and user workflows suitable for industrial environments. This project gave me a solid introduction to HMI development and deepened my understanding of how operator panels work in manufacturing and process industries.

Elektronika Industriale sh.p.k

Automation | Bcu/Dcs/Plc | SAS | SCADA | Grid Automation

🔄🌞 Reliable Gateway for Clean Energy Control ⚙️📡 We’ve successfully developed a Master IEC 60870-5-104 Gateway integrated with a #Weintek HMI, acting as the interface with the Power Plant Controller (PPC) of a photovoltaic plant. ☀️ The control logic is built using Straton IEC 61131-3, running standalone on a Linux-based RTU. This compact solution ensures smooth and secure communication between the SCADA system and the PPC helping deliver real time data and control signals across the PV plant infrastructure. 🧠💡 👨‍💻 Engineered for flexibility 🌐 Scalable for future integrations 🔌 Optimized for renewable energy control
🔄🌞 Reliable Gateway for Clean Energy Control ⚙️📡 We’ve successfully developed a Master IEC 60870-5-104 Gateway integrated with a #Weintek HMI, acting as the interface with the Power Plant Controller (PPC) of a photovoltaic plant. ☀️ The control logic is built using Straton IEC 61131-3, running standalone on a Linux-based RTU. This compact solution ensures smooth and secure communication between the SCADA system and the PPC helping deliver real time data and control signals across the PV plant infrastructure. 🧠💡 👨‍💻 Engineered for flexibility 🌐 Scalable for future integrations 🔌 Optimized for renewable energy control

Evandro Vasconcelos Severiano Júnior

Electrical Technician | Industrial Maintenance Electrician

Very simple to program and with a multitude of features, weintek HMIs are excellent, and the software is free, making the product accessible to the academic world!
Very simple to program and with a multitude of features, weintek HMIs are excellent, and the software is free, making the product accessible to the academic world!

August "Augie" Meinerz

Chasing Packaging Excellence | Let's Build Together

Every year, to get through the rough Wisconsin winters, I try to do a "me" project. Not something needed, or asked for, just something that I think would be fun. One of the hardest things about my job is that we have made some pretty cool machinery here from scratch. Just a group of guys with our ideas, some very late nights, and just total grit & determination to bring it to life. But we cannot show too much as we are under NDA (and 100% respect confidentially). Well here is a much smaller (and completely unnecessary 😂) version of that. So cheers to all of us dreamers, chasers, and people that want to live life to the max! As the saying goes: "You only get one ride on the roller-coaster, why wouldn't you lift up those hands???" 🙌🙌🙌 Thanks as always to some of our integration partners: Rockwell Automation Hamilton Automation LLC- Adam Shank Advanced Micro Controls Inc. (AMCI) LinMot USA Weintek (Maybe this isn't the shoutout you all want🤣) Side Note: Before anyone says it, yes the sides are enclosed now 🤗
Every year, to get through the rough Wisconsin winters, I try to do a "me" project. Not something needed, or asked for, just something that I think would be fun. One of the hardest things about my job is that we have made some pretty cool machinery here from scratch. Just a group of guys with our ideas, some very late nights, and just total grit & determination to bring it to life. But we cannot show too much as we are under NDA (and 100% respect confidentially). Well here is a much smaller (and completely unnecessary 😂) version of that. So cheers to all of us dreamers, chasers, and people that want to live life to the max! As the saying goes: "You only get one ride on the roller-coaster, why wouldn't you lift up those hands???" 🙌🙌🙌 Thanks as always to some of our integration partners: Rockwell Automation Hamilton Automation LLC- Adam Shank Advanced Micro Controls Inc. (AMCI) LinMot USA Weintek (Maybe this isn't the shoutout you all want🤣) Side Note: Before anyone says it, yes the sides are enclosed now 🤗

Raed Gamal

Water & Waste Water Treatment | RO Desalination

Installation, operation, and programming for a new HMI WEINTEK (cMT2108X2/V2) Connecting it with a PLC MITSUBISHI Module (FX3U-80MR/ES) for a Sewage Treatment Plant (STP)
Installation, operation, and programming for a new HMI WEINTEK (cMT2108X2/V2) Connecting it with a PLC MITSUBISHI Module (FX3U-80MR/ES) for a Sewage Treatment Plant (STP)

Adam Thraves MIET

Controls Engineer

📸 We've been hard at work the last few months securing new contracts and making new connections - here is a throwback to one of our projects from earlier this year. Part of a set of control panels made for a blowing system, Siemens V20 drives with an S71200. Weintek CMT 15" HMI, and a safety system using IDEM control gear. Power distributed through on a Wohner 160A crossboard, we loved the simplicity of this and the time saved in wiring speaks for itself! Housed in an floor standing ETA enclosure, great build quality as always. 🏭 We specialise in crafting bespoke control solutions tailored to each customer's unique needs. From design and electrical schematics to installation and commissioning, we ensure a smooth and efficient process from start to finish. 🔑 Offering a diverse controls and installations portfolio, we deliver turnkey solutions to meet our customers' requirements, guaranteeing top-notch quality and satisfaction. 📩 For inquiries or to learn more about our services, feel free to reach out to me directly at [email protected].
📸 We've been hard at work the last few months securing new contracts and making new connections - here is a throwback to one of our projects from earlier this year. Part of a set of control panels made for a blowing system, Siemens V20 drives with an S71200. Weintek CMT 15" HMI, and a safety system using IDEM control gear. Power distributed through on a Wohner 160A crossboard, we loved the simplicity of this and the time saved in wiring speaks for itself! Housed in an floor standing ETA enclosure, great build quality as always. 🏭 We specialise in crafting bespoke control solutions tailored to each customer's unique needs. From design and electrical schematics to installation and commissioning, we ensure a smooth and efficient process from start to finish. 🔑 Offering a diverse controls and installations portfolio, we deliver turnkey solutions to meet our customers' requirements, guaranteeing top-notch quality and satisfaction. 📩 For inquiries or to learn more about our services, feel free to reach out to me directly at [email protected].

Tim Hughes

G3 Automation | 𝘗𝘳𝘰𝘷𝘪𝘥𝘪𝘯𝘨 𝘐𝘯𝘵𝘦𝘨𝘳𝘢𝘵𝘦𝘥 𝘚𝘰𝘭𝘶𝘵𝘪𝘰𝘯𝘴 | 𝗨𝗟 𝗟𝗶𝘀𝘁𝗲𝗱🛡️

If you could have one 𝘀𝘂𝗽𝗲𝗿𝗽𝗼𝘄𝗲𝗿 at work, what would it be? For me, it’s 𝘰𝘶𝘵𝘴𝘵𝘢𝘯𝘥𝘪𝘯𝘨 𝘤𝘶𝘴𝘵𝘰𝘮𝘦𝘳 𝘴𝘦𝘳𝘷𝘪𝘤𝘦. It’s something I strive for every day. In sales, it’s not always about having the lowest price – it’s about building trust, solving problems and showing up for your customers. Because at the end of the day, exceptional service always wins. If I was a superhero action figure, I'd come equipped with… 🖥️ Weintek USA, Inc. cMT X Series 10" HMI ⚙️ Nidec Drives M750 Servo Drive & Unimotor hd 📱 iPhone 🥨 Philly Pretzel Factory Soft Pretzel 🤝 Outstanding Customer Service And yes, I love bringing soft pretzel crowd pleasers to our customers 😊. What’s your superpower??
If you could have one 𝘀𝘂𝗽𝗲𝗿𝗽𝗼𝘄𝗲𝗿 at work, what would it be? For me, it’s 𝘰𝘶𝘵𝘴𝘵𝘢𝘯𝘥𝘪𝘯𝘨 𝘤𝘶𝘴𝘵𝘰𝘮𝘦𝘳 𝘴𝘦𝘳𝘷𝘪𝘤𝘦. It’s something I strive for every day. In sales, it’s not always about having the lowest price – it’s about building trust, solving problems and showing up for your customers. Because at the end of the day, exceptional service always wins. If I was a superhero action figure, I'd come equipped with… 🖥️ Weintek USA, Inc. cMT X Series 10" HMI ⚙️ Nidec Drives M750 Servo Drive & Unimotor hd 📱 iPhone 🥨 Philly Pretzel Factory Soft Pretzel 🤝 Outstanding Customer Service And yes, I love bringing soft pretzel crowd pleasers to our customers 😊. What’s your superpower??

idris Adam

Sr. Mechanical Engineer

✔️Back in 2015, I created a detailed guide on setting up a generator monitoring system using a DEIF CGC 400 Controller, a PC power supply, and a Weintek 8070IP touch screen with EasyBuilder 8000 software. This setup allowed for real-time monitoring of generator #RPM, temperatures, and other critical parameters, which was quite advanced for its time. ✔️Fast forward to 2025, and the landscape of industrial automation has evolved significantly. DEIF now offers more sophisticated control systems with features like remote monitoring, integration with renewable energy sources, and enhanced efficiency. Similarly, WEINTEK's touch screens have advanced, with models like the #cMT X Series providing superior processing power, cloud connectivity, and support for a wide range of PLC protocols. ✔️Moreover, the integration of AI in generator monitoring systems has become more prevalent, enabling predictive maintenance, anomaly detection, and optimized performance. These advancements make it easier to manage and maintain generator systems, reducing downtime and improving overall efficiency. ✔️While my 2015 guide provides a solid foundation, today's systems offer even more capabilities, making them indispensable for modern industrial applications. ✅ Current Situation with AI and Other Resources in 2025 🟢 DEIF Advancements: DEIF, a global supplier of power control solutions, has continued to innovate, reporting a 7% revenue growth in 2024 and investing in R&D for new products, including highly efficient and compact power converters. Their genset controllers, such as the AGC-4 Mk II and iE 250, offer precision monitoring, enhanced efficiency, remote accessibility, and integration with hybrid microgrid applications, supporting renewable energy and storage solutions. These advancements suggest a shift toward more intelligent and sustainable control systems, as seen on their website and recent news 🟢 Weintek USA, Inc. Advancements: WEINTEK has evolved its HMI solutions, with the cMT X Series noted for its advanced automation capabilities, including headless operation, support for over 400 PLC protocols, cloud connectivity via MQTT and OPC UA, and mobile monitoring through cMT Viewer and EasyAccess 2.0.
✔️Back in 2015, I created a detailed guide on setting up a generator monitoring system using a DEIF CGC 400 Controller, a PC power supply, and a Weintek 8070IP touch screen with EasyBuilder 8000 software. This setup allowed for real-time monitoring of generator #RPM, temperatures, and other critical parameters, which was quite advanced for its time. ✔️Fast forward to 2025, and the landscape of industrial automation has evolved significantly. DEIF now offers more sophisticated control systems with features like remote monitoring, integration with renewable energy sources, and enhanced efficiency. Similarly, WEINTEK's touch screens have advanced, with models like the #cMT X Series providing superior processing power, cloud connectivity, and support for a wide range of PLC protocols. ✔️Moreover, the integration of AI in generator monitoring systems has become more prevalent, enabling predictive maintenance, anomaly detection, and optimized performance. These advancements make it easier to manage and maintain generator systems, reducing downtime and improving overall efficiency. ✔️While my 2015 guide provides a solid foundation, today's systems offer even more capabilities, making them indispensable for modern industrial applications. ✅ Current Situation with AI and Other Resources in 2025 🟢 DEIF Advancements: DEIF, a global supplier of power control solutions, has continued to innovate, reporting a 7% revenue growth in 2024 and investing in R&D for new products, including highly efficient and compact power converters. Their genset controllers, such as the AGC-4 Mk II and iE 250, offer precision monitoring, enhanced efficiency, remote accessibility, and integration with hybrid microgrid applications, supporting renewable energy and storage solutions. These advancements suggest a shift toward more intelligent and sustainable control systems, as seen on their website and recent news 🟢 Weintek USA, Inc. Advancements: WEINTEK has evolved its HMI solutions, with the cMT X Series noted for its advanced automation capabilities, including headless operation, support for over 400 PLC protocols, cloud connectivity via MQTT and OPC UA, and mobile monitoring through cMT Viewer and EasyAccess 2.0.

Starview Packaging Machinery, Inc.
Medical Device Tray Sealer FAT SUCCESS! Starview FAB/PH8-1418 fully automatic system with tray alignment on the unload is out the door! #packagingmachinery #packaginginnovation #medicaldevice
Medical Device Tray Sealer FAT SUCCESS! Starview FAB/PH8-1418 fully automatic system with tray alignment on the unload is out the door! #packagingmachinery #packaginginnovation #medicaldevice

Richard Arancibia

Ingeniero civil mecatrónico - Técnico Eléctrico - Automatización

🚀 HMI Weintek USA, Inc. + PLC Siemens Automation is not an expense, it is a strategic investment: it optimizes costs, minimizes risks and accelerates your industrial competitiveness. In this video I remotely programmed and commissioned an industrial system Alutipo Group Material Movement 🚀 Experts
🚀 HMI Weintek USA, Inc. + PLC Siemens Automation is not an expense, it is a strategic investment: it optimizes costs, minimizes risks and accelerates your industrial competitiveness. In this video I remotely programmed and commissioned an industrial system Alutipo Group Material Movement 🚀 Experts

Ali Farzam

CONTROLS EXPERT | PLC Programmer

🚗 Seat Inspection System Nearing Completion! 🛠️ Excited to share that we’re in the final stages of developing a universal car seat inspection system.capable of testing any type of car seat, though currently optimized for HAVAL models. 🔍 This fully automated system tests all major features, including: ✅ Forward/Backward Movement ✅ Recline Angle Verification ✅ Seat Heater Functionality ✅ Air Leakage & Airbag Test ✅ Sensor & Safety Feature Checks Hardware used: 🔸 Mitsubishi FX3G PLC 🔸 Weintek HMI 🔸 InduSoft SCADA for complete monitoring and control 📄 Automated PDF Reporting directly from SCADA — with flexible formats for different testing scenarios. Proud of the team and the technology behind this, bringing precision, safety, and scalability together.
🚗 Seat Inspection System Nearing Completion! 🛠️ Excited to share that we’re in the final stages of developing a universal car seat inspection system.capable of testing any type of car seat, though currently optimized for HAVAL models. 🔍 This fully automated system tests all major features, including: ✅ Forward/Backward Movement ✅ Recline Angle Verification ✅ Seat Heater Functionality ✅ Air Leakage & Airbag Test ✅ Sensor & Safety Feature Checks Hardware used: 🔸 Mitsubishi FX3G PLC 🔸 Weintek HMI 🔸 InduSoft SCADA for complete monitoring and control 📄 Automated PDF Reporting directly from SCADA — with flexible formats for different testing scenarios. Proud of the team and the technology behind this, bringing precision, safety, and scalability together.

Darby Kramer, CFPS, CMRP

President and Co-Founder of Dynamic Motion Industries LLC. | Maintenance and Reliability Leader with a passion for providing innovative solutions to manufacturers everyday problems.

I love these HMIs, I keep getting more and more impressed with their capabilities!

Pascal Aspeslagh

Head of Research and Development

Almost ready to install 😎

Darwin Thiessen

System Specialist at Diversified Systems LLC

Have an interesting job recently reviving a old AB 1500 LRP PLC (16 bit) and programming it to a Weintek HMI (32 bit). PLC was 25 years old and you will see from the pictures had to put everything back together. Original HMI was dead LED light came on but screen was blank and casing for HMI was broke. Few problems - Since original HMI was dead hade to start from scratch programming new one - PLC was faulted when powered up. Faulty cards, had to get new. - Was hoping to get original program from eeprom but was locked out, or chip has failed. Luckily PLC battery was good and program still in PLC. - Challenge converting 32 bit technology to 16 bit so New HMI would communicate with PLC.
Have an interesting job recently reviving a old AB 1500 LRP PLC (16 bit) and programming it to a Weintek HMI (32 bit). PLC was 25 years old and you will see from the pictures had to put everything back together. Original HMI was dead LED light came on but screen was blank and casing for HMI was broke. Few problems - Since original HMI was dead hade to start from scratch programming new one - PLC was faulted when powered up. Faulty cards, had to get new. - Was hoping to get original program from eeprom but was locked out, or chip has failed. Luckily PLC battery was good and program still in PLC. - Challenge converting 32 bit technology to 16 bit so New HMI would communicate with PLC.

Jimmy DiTraglia

Owner - JD Controls LLC | Automation Controls Engineer

They're great HMIs and I love being able to use Codesys with them. Costs me nothing to do all the learning and building I want. I'm developing something similar to PlantPAx, just not near as heavy and convoluted. Trying to get all the basics for each device type and make it so it's easy to scale up if a customer wants more features.
They're great HMIs and I love being able to use Codesys with them. Costs me nothing to do all the learning and building I want. I'm developing something similar to PlantPAx, just not near as heavy and convoluted. Trying to get all the basics for each device type and make it so it's easy to scale up if a customer wants more features.

Maria Masood

Undergraduate | Electrical Engineering

Proud to share my recent project, developed for a Weintek HMI screen using EasyBuilder software, during my internship at Atlas Engineering Ltd. 🚀 As part of my time at the DID Plant—where high-precision motorcycle chain components are manufactured—I designed and implemented a Human-Machine Interface (HMI) system to streamline production data handling and performance monitoring. 🔹 Project Goal To simplify daily production data entry, automate dispatch and target tracking, and provide real-time performance insights through an interactive dashboard—helping operators and supervisors make faster, data-driven decisions. 🔹 System Overview The HMI was built with three main interfaces: 1️⃣ Home Page – Company branding with real-time clock 2️⃣ Daily Production Table – Manual input for part-wise data (Inner Plate, Outer Plate, Pin, Bush, Roller), categorized by product models (CD-70, CG-125, CAM 25) and departments (OEM/SPD) 3️⃣ Production Dashboard – Visuals and records including: Monthly target vs achieved Daily dispatch summary Yearly log (Jan–Dec) Pie charts for progress visualization Functional controls for refresh, calculations, and logging 🔹 Automation via Macros ✅ Auto-calculation of total dispatch ✅ Target progress tracking ✅ Dynamic pie chart updates ✅ Monthly-to-yearly data logging 🔹 Key Impact This system enhanced operator efficiency, ensured accurate production records, and introduced real-time visibility into daily operations—bridging the gap between raw data and actionable insights. This hands-on project allowed me to apply my skills in EasyBuilder, macro programming, and industrial automation to solve practical production challenges on a Weintek-based interface.
Proud to share my recent project, developed for a Weintek HMI screen using EasyBuilder software, during my internship at Atlas Engineering Ltd. 🚀 As part of my time at the DID Plant—where high-precision motorcycle chain components are manufactured—I designed and implemented a Human-Machine Interface (HMI) system to streamline production data handling and performance monitoring. 🔹 Project Goal To simplify daily production data entry, automate dispatch and target tracking, and provide real-time performance insights through an interactive dashboard—helping operators and supervisors make faster, data-driven decisions. 🔹 System Overview The HMI was built with three main interfaces: 1️⃣ Home Page – Company branding with real-time clock 2️⃣ Daily Production Table – Manual input for part-wise data (Inner Plate, Outer Plate, Pin, Bush, Roller), categorized by product models (CD-70, CG-125, CAM 25) and departments (OEM/SPD) 3️⃣ Production Dashboard – Visuals and records including: Monthly target vs achieved Daily dispatch summary Yearly log (Jan–Dec) Pie charts for progress visualization Functional controls for refresh, calculations, and logging 🔹 Automation via Macros ✅ Auto-calculation of total dispatch ✅ Target progress tracking ✅ Dynamic pie chart updates ✅ Monthly-to-yearly data logging 🔹 Key Impact This system enhanced operator efficiency, ensured accurate production records, and introduced real-time visibility into daily operations—bridging the gap between raw data and actionable insights. This hands-on project allowed me to apply my skills in EasyBuilder, macro programming, and industrial automation to solve practical production challenges on a Weintek-based interface.

HAHN Automation Group
Hi, I'm Jacob and #IamHAHN since 2020. I first joined HAHN Automation Group as a co-op student, completing three rotations between 2020 and 2021 while studying at the University of Cincinnati. After graduating, I started full time in May 2023 as a Controls Engineer in Software. In this role, I program and debug machines from power on through final shipment. I work with Allen Bradley PLCs, ROS2 systems in Ubuntu, HMIs (Allen Bradley and Weintek), Machine Vision Systems (Cognex and Keyence), and more. Even early on, my time at HAHN was filled with learning and hands-on experience. Now, full time, it continues to be a rewarding journey with plenty of variety. What I appreciate most is that every day brings something new. I am constantly expanding my technical knowledge, improving my communication skills, and stepping into leadership opportunities through customer interaction and group coordination. A standout moment was programming a show machine with Mecademic robots in my first year and traveling to the ATX Trade Show in California. It opened my eyes to the scale of the automation industry and gave me the chance to meet other integrators and vendors. Another proud achievement has been seeing a project through from start to finish and watching a machine ship out successfully. My best experience at HAHN has been taking on a customer's new end of line functional tester. It is a significant departure from our typical project at HAHN, which made it especially fulfilling. Through this project, I gained valuable technical skills like Ubuntu, ROS2, EtherCAT, Python, MQTT, and Weintek HMI. I also formed connections with the customer's software team and have become HAHN’s go-to person for this technology which is great for my career growth and something I’m proud of.
Hi, I'm Jacob and #IamHAHN since 2020. I first joined HAHN Automation Group as a co-op student, completing three rotations between 2020 and 2021 while studying at the University of Cincinnati. After graduating, I started full time in May 2023 as a Controls Engineer in Software. In this role, I program and debug machines from power on through final shipment. I work with Allen Bradley PLCs, ROS2 systems in Ubuntu, HMIs (Allen Bradley and Weintek), Machine Vision Systems (Cognex and Keyence), and more. Even early on, my time at HAHN was filled with learning and hands-on experience. Now, full time, it continues to be a rewarding journey with plenty of variety. What I appreciate most is that every day brings something new. I am constantly expanding my technical knowledge, improving my communication skills, and stepping into leadership opportunities through customer interaction and group coordination. A standout moment was programming a show machine with Mecademic robots in my first year and traveling to the ATX Trade Show in California. It opened my eyes to the scale of the automation industry and gave me the chance to meet other integrators and vendors. Another proud achievement has been seeing a project through from start to finish and watching a machine ship out successfully. My best experience at HAHN has been taking on a customer's new end of line functional tester. It is a significant departure from our typical project at HAHN, which made it especially fulfilling. Through this project, I gained valuable technical skills like Ubuntu, ROS2, EtherCAT, Python, MQTT, and Weintek HMI. I also formed connections with the customer's software team and have become HAHN’s go-to person for this technology which is great for my career growth and something I’m proud of.

Javier Ahmad

Instrument Engineer

Project Highlight: Furnace Monitoring System – Chemistry Lab, ITB As part of the Engineering team at PT Daun Biru Engineering, I had the opportunity to take the lead as Project Manager for the successful installation and integration of a Furnace Monitoring System at the Chemistry Laboratory of Institut Teknologi Bandung (ITB). The project was executed at the Chemistry Laboratory of Institut Teknologi Bandung (ITB) in Bandung, on March 24–25, 2025, for our client Dr. Carolus Borromeus Rasrendra, Head of the Chemistry Lab. The scope of work included the replacement of 13 temperature controllers (Autonics TK4S and TK4L series), integration of temperature data from both Autonics controllers and Fuji recorders via the Modbus protocol, and the setup of centralized data acquisition using a Weintek HMI, which served as a data logger and trend monitoring interface. Additional tasks involved panel baseplate modification, structured cabling, and the installation of supporting components such as a PC All-in-One (AIO), UPS, and DIN-rail accessories. In total, the system enabled real-time logging and monitoring of 25 temperature points across two independent reactor systems. This system enhances ITB’s lab operations with accurate, real-time furnace temperature monitoring and historical trend data — supporting their chemical research activities with better traceability and control. Appreciate the support from the ITB Chemistry Lab and the amazing team at PT Daun Biru Engineering for making this project a success.
Project Highlight: Furnace Monitoring System – Chemistry Lab, ITB As part of the Engineering team at PT Daun Biru Engineering, I had the opportunity to take the lead as Project Manager for the successful installation and integration of a Furnace Monitoring System at the Chemistry Laboratory of Institut Teknologi Bandung (ITB). The project was executed at the Chemistry Laboratory of Institut Teknologi Bandung (ITB) in Bandung, on March 24–25, 2025, for our client Dr. Carolus Borromeus Rasrendra, Head of the Chemistry Lab. The scope of work included the replacement of 13 temperature controllers (Autonics TK4S and TK4L series), integration of temperature data from both Autonics controllers and Fuji recorders via the Modbus protocol, and the setup of centralized data acquisition using a Weintek HMI, which served as a data logger and trend monitoring interface. Additional tasks involved panel baseplate modification, structured cabling, and the installation of supporting components such as a PC All-in-One (AIO), UPS, and DIN-rail accessories. In total, the system enabled real-time logging and monitoring of 25 temperature points across two independent reactor systems. This system enhances ITB’s lab operations with accurate, real-time furnace temperature monitoring and historical trend data — supporting their chemical research activities with better traceability and control. Appreciate the support from the ITB Chemistry Lab and the amazing team at PT Daun Biru Engineering for making this project a success.

Fedor Kochedykov

Senior Electronic Engineer - RIFAR JSC

I started working with Weintek a very long time ago (EasyBuilder 8000, when it was just becoming relevant). Back then, I mainly worked on Siemens, Omron, and Pro-face HMIs. Since then, I've witnessed many changes in the HMI and SCADA field, and Weintek continues to impress with its innovations. I've seen European companies increasingly adopting Weintek right before my eyes. The learning curve is very low initially, but as a specialist grows, Weintek keeps offering more and more advanced capabilities. I truly hope this trend continues!
I started working with Weintek a very long time ago (EasyBuilder 8000, when it was just becoming relevant). Back then, I mainly worked on Siemens, Omron, and Pro-face HMIs. Since then, I've witnessed many changes in the HMI and SCADA field, and Weintek continues to impress with its innovations. I've seen European companies increasingly adopting Weintek right before my eyes. The learning curve is very low initially, but as a specialist grows, Weintek keeps offering more and more advanced capabilities. I truly hope this trend continues!

Moises Braga

Tecnólogo Automação Industrial | Analista de Automação Industrial

Taking advantage of the holiday to explore some HMI libraries and create layout patterns for graphic screens.

Brandon Ellis

Automation Consultant

A fantastic platform for #machinedata #visualization. Featuring over 400 plc communications drivers in both #touchscreen and #headless form factors, Weintek USA, Inc. offers the very best in #hmi and #webdisplay products making machine data management a breeze.
A fantastic platform for #machinedata #visualization. Featuring over 400 plc communications drivers in both #touchscreen and #headless form factors, Weintek USA, Inc. offers the very best in #hmi and #webdisplay products making machine data management a breeze.

Infotek Ingeniería
We installed and commissioned a flame modulation temperature control system in bakery ovens. The system consists of a Fatek PLC, Weintek HMI interface and drivers for stepper motors, which operate the air intake flaps, allowing fine and efficient temperature control. The work was carried out on a non-working day so as not to interrupt production. Automating is also understanding when and how to intervene without slowing down the operation. ⁣
We installed and commissioned a flame modulation temperature control system in bakery ovens. The system consists of a Fatek PLC, Weintek HMI interface and drivers for stepper motors, which operate the air intake flaps, allowing fine and efficient temperature control. The work was carried out on a non-working day so as not to interrupt production. Automating is also understanding when and how to intervene without slowing down the operation. ⁣

Dennis Arvidsson

Technical Systems Specialist at Industrial AB

At ppm Industrial AB, we have recently completed a tailor-made gas detection exchange system – adapted for installation directly in the customer's existing electrical cabinet. 🛠️ The system is pre-mounted on a sheet metal for easy integration and minimized installation time. 📐 The limited space required a compact and precisely designed build, without compromising on function or accessibility. 📈 The HMI panel is recessed into the cabinet door and provides a full overview of: • Current gas values • Trends and history • Detector locations with visual status indication (colour change in case of alarm). The result is an efficient and future-proof solution for upgrading older gas alarms – with a focus on reliability and clarity.
At ppm Industrial AB, we have recently completed a tailor-made gas detection exchange system – adapted for installation directly in the customer's existing electrical cabinet. 🛠️ The system is pre-mounted on a sheet metal for easy integration and minimized installation time. 📐 The limited space required a compact and precisely designed build, without compromising on function or accessibility. 📈 The HMI panel is recessed into the cabinet door and provides a full overview of: • Current gas values • Trends and history • Detector locations with visual status indication (colour change in case of alarm). The result is an efficient and future-proof solution for upgrading older gas alarms – with a focus on reliability and clarity.

Denni Santoso Limantoro

Mechanical Engineer

Connecting PLC Omron CP2E - HMI Weintek MT8102iE - Inverter Schneider ATV320- TC Autonics TK4S via modbus rtu

Dave Thompson

Thompson Electrical Solutions Ltd - Northland Controls & Automation

Been learning motion control with Codesys. using Ethercat servo's, Something I've always wanted to do but never had the time or space at work. So bought a 3 axis router frame kit. modified it to take servo motors. and jumped on in. It's been a very cool project and a great project to learn on. Still lots of small functionality to program in. but its operational. Just done the auto tool zero, so at the push of a button on the HMI it will measure the height of the tooling and offset correctly to the set cut depth. Check out. lnkd.in/gXPcQ2zV
Been learning motion control with Codesys. using Ethercat servo's, Something I've always wanted to do but never had the time or space at work. So bought a 3 axis router frame kit. modified it to take servo motors. and jumped on in. It's been a very cool project and a great project to learn on. Still lots of small functionality to program in. but its operational. Just done the auto tool zero, so at the push of a button on the HMI it will measure the height of the tooling and offset correctly to the set cut depth. Check out. lnkd.in/gXPcQ2zV

M. Aziz ul haq

Automation Engineer | PLC & HMI Specialist

I’m excited to share that I successfully completed the #programming and #commissioning of an #extruder_machine designed to manufacture #PPRC_pipes (Polypropylene Random Copolymer), widely used in gas and water supply systems. 🔧 This machine is now ready to be shipped to #Oman – a proud milestone to see locally developed automation reaching international markets! 📌 Project Highlights: 🔹 #Delta PLC (DVP-ES2 Series) for system logic and control 🔹 4 #Thermocouple Modules for precise heater temperature monitoring 🔹 Weintek HMI for user-friendly operation and real-time data visualization 🔹 #Puma VFD (115kW) to control the extrusion motor speed and torque efficiently 🔹 Heater & Blower Control Logic: • When the temperature rises above the setpoint, the heater turns off and the blower turns on • When the temperature drops below the threshold, the heater turns back on to maintain process stability This setup ensures accurate temperature regulation, energy efficiency, and consistent extrusion quality for producing high-grade PPRC pipes.
I’m excited to share that I successfully completed the #programming and #commissioning of an #extruder_machine designed to manufacture #PPRC_pipes (Polypropylene Random Copolymer), widely used in gas and water supply systems. 🔧 This machine is now ready to be shipped to #Oman – a proud milestone to see locally developed automation reaching international markets! 📌 Project Highlights: 🔹 #Delta PLC (DVP-ES2 Series) for system logic and control 🔹 4 #Thermocouple Modules for precise heater temperature monitoring 🔹 Weintek HMI for user-friendly operation and real-time data visualization 🔹 #Puma VFD (115kW) to control the extrusion motor speed and torque efficiently 🔹 Heater & Blower Control Logic: • When the temperature rises above the setpoint, the heater turns off and the blower turns on • When the temperature drops below the threshold, the heater turns back on to maintain process stability This setup ensures accurate temperature regulation, energy efficiency, and consistent extrusion quality for producing high-grade PPRC pipes.

Ali Emre Doğru

DMY Elektrik Otomasyon Aydınlatma

With 2 vacon100 drivers, tag pulling and communication are provided with BacNet protocol over weintek HMI. #Vacon#Weintek#BacNet
With 2 vacon100 drivers, tag pulling and communication are provided with BacNet protocol over weintek HMI. #Vacon#Weintek#BacNet

JD Controls LLC
More IOLink fun. This time with a sensor that detects reflectivity in addition to distance. This could come in very handy in conveyor and packaging applications. Changing bright/dark setpoints or near/far setpoints to turn those outputs on is all handled quickly over IOLink.
More IOLink fun. This time with a sensor that detects reflectivity in addition to distance. This could come in very handy in conveyor and packaging applications. Changing bright/dark setpoints or near/far setpoints to turn those outputs on is all handled quickly over IOLink.

José Amador

Independent Mechanical Engineer | Field Diagnostics & Modbus Integration | Commissioning & Technical Training Partner

Putting ideas into practice Configuration of 5 Weintek HMIs for compressed air systems in progress. Thanks to my clients for trusting my expertise.
Putting ideas into practice Configuration of 5 Weintek HMIs for compressed air systems in progress. Thanks to my clients for trusting my expertise.

Simarjit Singh ✅

Mechatronics Engineering

I Love weintek.....Brand of HMI.......

Total Automation Systems
This electrical control cabinet is designed for the automation and control of a specialized piece of equipment used in the water sector. It ensures operational safety, system reliability, and ease of monitoring through high-quality industrial components. Key Features: Enclosure: The cabinet is built from fiberglass-reinforced polyamide, offering excellent mechanical strength and high resistance to corrosion, humidity, and UV exposure. This makes it suitable for challenging environments typically found in water-related applications. Automation Components: The control system is based on Siemens PLC hardware, known for its robustness, flexibility, and seamless integration into industrial networks. Human-Machine Interface: A Weintek HMI provides real-time process visualization, intuitive navigation, and remote diagnostics capability, simplifying operation and maintenance. Wiring and Protections: Internal wiring is routed cleanly and labeled according to industrial standards. The cabinet includes circuit breakers, relays, and other protective devices sized appropriately for the connected loads. This cabinet is part of a complete automated solution for equipment operating within the water industry, where reliability and long-term performance are critical.
This electrical control cabinet is designed for the automation and control of a specialized piece of equipment used in the water sector. It ensures operational safety, system reliability, and ease of monitoring through high-quality industrial components. Key Features: Enclosure: The cabinet is built from fiberglass-reinforced polyamide, offering excellent mechanical strength and high resistance to corrosion, humidity, and UV exposure. This makes it suitable for challenging environments typically found in water-related applications. Automation Components: The control system is based on Siemens PLC hardware, known for its robustness, flexibility, and seamless integration into industrial networks. Human-Machine Interface: A Weintek HMI provides real-time process visualization, intuitive navigation, and remote diagnostics capability, simplifying operation and maintenance. Wiring and Protections: Internal wiring is routed cleanly and labeled according to industrial standards. The cabinet includes circuit breakers, relays, and other protective devices sized appropriately for the connected loads. This cabinet is part of a complete automated solution for equipment operating within the water industry, where reliability and long-term performance are critical.

CaptainDisco
I totally understand the getting away from AB pricing. But, I can get a 12" Weintek for less than $900 and I can talk to any PLC I want. But, the AB integration is so simple hence the reason we switch (with customer approval). BTW the OnLogic screens look sleek. That is actually what we are using for this project. Not Edge though. Maybe I need to look more into that I haven't really looked at all.
I totally understand the getting away from AB pricing. But, I can get a 12" Weintek for less than $900 and I can talk to any PLC I want. But, the AB integration is so simple hence the reason we switch (with customer approval). BTW the OnLogic screens look sleek. That is actually what we are using for this project. Not Edge though. Maybe I need to look more into that I haven't really looked at all.

LibrarySpecialist396
I actually like them. I have used their HMIs in the past and liked them for most "simple" applications. They have a ton of very useful options, and their driver support is excellent. Yes, I have done a few from scratch. For instance, the program for the scenario I listed in this post has about 19 screens with anything from trends to recipe management. Took me a couple weeks (I am the only controls engineer at my plant, so I couldn't work on it all day every day lol)
I actually like them. I have used their HMIs in the past and liked them for most "simple" applications. They have a ton of very useful options, and their driver support is excellent. Yes, I have done a few from scratch. For instance, the program for the scenario I listed in this post has about 19 screens with anything from trends to recipe management. Took me a couple weeks (I am the only controls engineer at my plant, so I couldn't work on it all day every day lol)

Bladders_
Yes Weintek can drive any modbus relay board. You can use weintek IR-ETN40R.

BobB
I require remote access to my projects that are away from home. I did some homework and decided that Weintek looked to have a good solution. Set up my first Weintek touch screen yesterday. I set up a domain on Weincloud - free. A secure VPN connection. I had purchased a remote access card when I purchased the screen - about $90 AUD. I set up the screen with appropriate IP addresses - modem was connected complete with an inexpensive data only SIM card - entered modem IP address as appropriate - rebooted the touch screen and clicked add screen on the cloud interface. I added the hardware number of the screen and the serial number on the access card and viola - I was connected to the screen via EasyAccess software and Weintek CMT viewer. Operating switches and the like. The hardware number and access card number are locked together. My PLC was connected to the second Ethernet port on the touch screen and my laptop was connected to the PLC as well through a switch and I was online to the PLC. I clicked on 'pass through' on the cloud connection - added the IP address of the PLC - the software noted that there already was a connection to the PLC (my laptop) - said it would be disconnected - clicked OK - my laptop Ethernet connectiion was disconnected and was then connected through the modem/cloud connection - absolutely seamless. I think back to how I used to have to connect with expensive Extranet cards - having to use a DNS server to find out the public IP address or have an expensive VPN account and program the modem mystery bag - do routing tables in the PLC software - painfull. Very impressed and the screens are not expensive - graphics pretty good as well - a heap of drivers for just about any PLC brand. I did not have to do any programming in the modem either - its default IP address was out of the way of everything so no need. In this case I used a Teleorigin modem but guess that probably any brand would do. Many have a default IP address of 192.168.1.1 which is inconvenient as that is the default address of most routers as well so the IP address would need to be changed before connecting to anything. Now on to discovering about the email feature from the screen through Weincloud using a SMTP mail server. Then on to push messages to mobiles with EasyAccess running on them. My customer will also have access to the screen from mobile phones and computers using the EasyAccess app - everyone is happy. Next one will be setup next week - will have to put together a detailed instruction sheet for my colleagues. Red Lion have a solution of course but it is so expensive and does not appear to have all the features Weintek does have.
I require remote access to my projects that are away from home. I did some homework and decided that Weintek looked to have a good solution. Set up my first Weintek touch screen yesterday. I set up a domain on Weincloud - free. A secure VPN connection. I had purchased a remote access card when I purchased the screen - about $90 AUD. I set up the screen with appropriate IP addresses - modem was connected complete with an inexpensive data only SIM card - entered modem IP address as appropriate - rebooted the touch screen and clicked add screen on the cloud interface. I added the hardware number of the screen and the serial number on the access card and viola - I was connected to the screen via EasyAccess software and Weintek CMT viewer. Operating switches and the like. The hardware number and access card number are locked together. My PLC was connected to the second Ethernet port on the touch screen and my laptop was connected to the PLC as well through a switch and I was online to the PLC. I clicked on 'pass through' on the cloud connection - added the IP address of the PLC - the software noted that there already was a connection to the PLC (my laptop) - said it would be disconnected - clicked OK - my laptop Ethernet connectiion was disconnected and was then connected through the modem/cloud connection - absolutely seamless. I think back to how I used to have to connect with expensive Extranet cards - having to use a DNS server to find out the public IP address or have an expensive VPN account and program the modem mystery bag - do routing tables in the PLC software - painfull. Very impressed and the screens are not expensive - graphics pretty good as well - a heap of drivers for just about any PLC brand. I did not have to do any programming in the modem either - its default IP address was out of the way of everything so no need. In this case I used a Teleorigin modem but guess that probably any brand would do. Many have a default IP address of 192.168.1.1 which is inconvenient as that is the default address of most routers as well so the IP address would need to be changed before connecting to anything. Now on to discovering about the email feature from the screen through Weincloud using a SMTP mail server. Then on to push messages to mobiles with EasyAccess running on them. My customer will also have access to the screen from mobile phones and computers using the EasyAccess app - everyone is happy. Next one will be setup next week - will have to put together a detailed instruction sheet for my colleagues. Red Lion have a solution of course but it is so expensive and does not appear to have all the features Weintek does have.

CME ENGINEERING
🚀 Proud to share our latest achievement at Sona Hospital, Fauji Fertilizer Company Limited! We provided automation services and installed an electrical panel for their 2000 LPH plant. The panel was built using Delta PLC ES2 series and Weintek MT8071IE, seamlessly integrated with an INVT VFD for optimal control and performance. 🌟 💡 Delivering automation solutions that make a difference!
🚀 Proud to share our latest achievement at Sona Hospital, Fauji Fertilizer Company Limited! We provided automation services and installed an electrical panel for their 2000 LPH plant. The panel was built using Delta PLC ES2 series and Weintek MT8071IE, seamlessly integrated with an INVT VFD for optimal control and performance. 🌟 💡 Delivering automation solutions that make a difference!

Naomi Pittman

CEO of ELEKproTEK 🧠 Electrical | Controls | Automation 🔌24/7 Service | Supplies | Training🔋

Big thanks to Nikki Gonzales from Weintek USA, Inc. for stopping by our Atlanta HQ yesterday! She brought in an awesome HMI demo 🖥️ and we got into some real tech talk — from controls ⚙️ and SCADA 🧠, to prototype battery backup ideas 🔋 we’ve got in development. We gave her a tour of the facility we’re growing into 🏗️, shared some of the vision behind ELEKproTEK, and had some great conversation around innovation and bridging the gap between electrical and tech. Even better — Nikki got to meet my amazing fiancé Simone 💍 who has helped ELEKproTEK Scale so quickly, our Service Manager Micheal who has jumped in and took charge, and our newest electrical apprentice Queen ⚡ — all helping power the future of ELEKproTEK. The HMI she brought, it definitely sparked ideas for what might end up in our 1st-gen smart panel prototype. This is how it starts: real connections, powerful conversations, and a shared commitment to the future. Thanks again for stopping by, Nikki!
Big thanks to Nikki Gonzales from Weintek USA, Inc. for stopping by our Atlanta HQ yesterday! She brought in an awesome HMI demo 🖥️ and we got into some real tech talk — from controls ⚙️ and SCADA 🧠, to prototype battery backup ideas 🔋 we’ve got in development. We gave her a tour of the facility we’re growing into 🏗️, shared some of the vision behind ELEKproTEK, and had some great conversation around innovation and bridging the gap between electrical and tech. Even better — Nikki got to meet my amazing fiancé Simone 💍 who has helped ELEKproTEK Scale so quickly, our Service Manager Micheal who has jumped in and took charge, and our newest electrical apprentice Queen ⚡ — all helping power the future of ELEKproTEK. The HMI she brought, it definitely sparked ideas for what might end up in our 1st-gen smart panel prototype. This is how it starts: real connections, powerful conversations, and a shared commitment to the future. Thanks again for stopping by, Nikki!

Tim Hughes

Sales at G3 Automation | 𝘗𝘳𝘰𝘷𝘪𝘥𝘪𝘯𝘨 𝘐𝘯𝘵𝘦𝘨𝘳𝘢𝘵𝘦𝘥 𝘚𝘰𝘭𝘶𝘵𝘪𝘰𝘯𝘴 | 𝗨𝗟 𝗟𝗶𝘀𝘁𝗲𝗱🛡️

Family road trip to North Carolina for a few days! Weintek USA, Inc. HMI spotted at a rest stop off 81 South near Carlisle, PA! Lesss goooo!
Family road trip to North Carolina for a few days! Weintek USA, Inc. HMI spotted at a rest stop off 81 South near Carlisle, PA! Lesss goooo!

Javier Navarro Jr

PLC Programmer and Controls Technician at Schrader Mechanical

Made this bad boy from scratch for PLC trouble shooting,sorry my phone kinda sucks. #EasyBuilderPro #Weintek
Made this bad boy from scratch for PLC trouble shooting,sorry my phone kinda sucks. #EasyBuilderPro #Weintek

B
bkottaras
I've been using them for quite some time. The graphics are pretty good. The drivers are the big plus. Modbus is straight forward for CoDeSys (Wago & stuff). They also offer their own CoDeSys I/O and such (you need to pick the right unit for it though). I even used them for some old SLC replacements serial & Ethernet, beats PV!! And yes, Maple has a great support team if you need it. Weintek as well as Maple have their own YouTube channels. You'll find pretty much everything on there as far as setting up a unit.
I've been using them for quite some time. The graphics are pretty good. The drivers are the big plus. Modbus is straight forward for CoDeSys (Wago & stuff). They also offer their own CoDeSys I/O and such (you need to pick the right unit for it though). I even used them for some old SLC replacements serial & Ethernet, beats PV!! And yes, Maple has a great support team if you need it. Weintek as well as Maple have their own YouTube channels. You'll find pretty much everything on there as far as setting up a unit.

Paul Godines

Need a Tested, Trusted & Trained Maintenance or Engineering Team?

One of the biggest factors holding entry level techs and engineers back in this career, is the license fees. Its CRAZY, if they want to grow they will have to change, and Weintek is on the right track with this software. As a matter of fact eventually they will have to change or face huge financial loss because of it. Keep it up Weintek.
One of the biggest factors holding entry level techs and engineers back in this career, is the license fees. Its CRAZY, if they want to grow they will have to change, and Weintek is on the right track with this software. As a matter of fact eventually they will have to change or face huge financial loss because of it. Keep it up Weintek.

JD Controls LLC
Progress is coming along well on developing a controls library of Codesys code with corresponding HMI graphics. I'm keeping it all very basic for now but the way this is being developed leaves it easy to scale up for adding more features for device control. With Codesys and Easy Builder Pro both being a free software download, no worrying about expensive software contracts to troubleshoot code or make modifications. These HMIs can run Codesys, so there's no need for an extra piece of hardware as a PLC. Over the next few months I will be demonstrating more devices as I develop them, state machine and sequencer control of automation, and recipe integration. Weintek USA, Inc. CODESYS North America
Progress is coming along well on developing a controls library of Codesys code with corresponding HMI graphics. I'm keeping it all very basic for now but the way this is being developed leaves it easy to scale up for adding more features for device control. With Codesys and Easy Builder Pro both being a free software download, no worrying about expensive software contracts to troubleshoot code or make modifications. These HMIs can run Codesys, so there's no need for an extra piece of hardware as a PLC. Over the next few months I will be demonstrating more devices as I develop them, state machine and sequencer control of automation, and recipe integration. Weintek USA, Inc. CODESYS North America

MA
Muhammad Indrastata Iftitana Arvi

Automation and Electrical Engineering | Enthusiast in Electronics | Robotics

Finally wrapped up the integration of a control system with Schneider TM221 PLC and Weintek HMI MT81. The system handles 25 motors, solenoids, floater switch, and sensors fully controllable in both manual and auto mode.
Finally wrapped up the integration of a control system with Schneider TM221 PLC and Weintek HMI MT81. The system handles 25 motors, solenoids, floater switch, and sensors fully controllable in both manual and auto mode.

Alicia Gilpin Muñoz (Ali G)

Owner Process & Controls Engineering LLC

Diedrich Roasters use Weintek USA, Inc. Human Machine Interfaces making this a family affair. Diedrich is my family and Weintek is now Nikki Gonzales family. Diedrich Roasters is an American Company dedicated to service and quality. They are incredibly people centric. I don't see that anymore where the dignity of the employees is just as important as the service to the customer...but it's still alive in pockets if you look hard enough.
Diedrich Roasters use Weintek USA, Inc. Human Machine Interfaces making this a family affair. Diedrich is my family and Weintek is now Nikki Gonzales family. Diedrich Roasters is an American Company dedicated to service and quality. They are incredibly people centric. I don't see that anymore where the dignity of the employees is just as important as the service to the customer...but it's still alive in pockets if you look hard enough.

Sohaib Sameer

INDUSTRIAL ELECTRONICS ENGINEER

🔧⚡ Milestone Achieved! Thrilled to share the successful installation of a 175kW Sungrow inverter, expanding an existing 125kW solar setup—bringing the total to 300kW of clean, renewable energy! ☀️🔋 This hybrid system features both Sungrow and Huawei inverters, seamlessly integrated and smartly managed through Encombi 🔗 with unique device IDs for efficient communication and monitoring. The entire system is also being actively monitored through a Weintek HMI 📟—offering real-time data visualization and control for better performance and maintenance. From system design to commissioning, this project has been an amazing hands-on experience in hybrid solar solutions and smart energy management. 🙌 Proud to be contributing to a smarter, greener, and more sustainable future. 🌱🌍
🔧⚡ Milestone Achieved! Thrilled to share the successful installation of a 175kW Sungrow inverter, expanding an existing 125kW solar setup—bringing the total to 300kW of clean, renewable energy! ☀️🔋 This hybrid system features both Sungrow and Huawei inverters, seamlessly integrated and smartly managed through Encombi 🔗 with unique device IDs for efficient communication and monitoring. The entire system is also being actively monitored through a Weintek HMI 📟—offering real-time data visualization and control for better performance and maintenance. From system design to commissioning, this project has been an amazing hands-on experience in hybrid solar solutions and smart energy management. 🙌 Proud to be contributing to a smarter, greener, and more sustainable future. 🌱🌍

Jordan Ehst

Owner, Designer, Programmer at Ehst Systems and Controls

Stopped by to add a feature to a small project you did several years ago. It isn't the prettiest machine ever but it's a fun little piece. Beckhoff Automation USA Weintek
Stopped by to add a feature to a small project you did several years ago. It isn't the prettiest machine ever but it's a fun little piece. Beckhoff Automation USA Weintek

ZTF Lāsma

Industrial Automation & Sensor Technologies

We've trusted Weintek for many years — and confidently recommend it to our clients. That’s why this announcement from Weintek isn’t just great news for us — it's a win for everyone seeking a simpler, faster, and more reliable industrial control solution. Weintek CODESYS SoftPLC now supports Profinet IO Master! Profinet is currently the most popular industrial communication protocol in the world, leading the Ethernet-based market with a 23% share. With this update, Weintek joins the ranks of fully integrated, high-performance solutions for modern automation. What does this mean in practice? A single HMI + PLC platform that reduces the need for additional controllers or gateways. Seamless integration with Profinet IO devices. Real-time, deterministic communication — all within CODESYS. Read the full story here 👉 lnkd.in/dDuRcUDC
We've trusted Weintek for many years — and confidently recommend it to our clients. That’s why this announcement from Weintek isn’t just great news for us — it's a win for everyone seeking a simpler, faster, and more reliable industrial control solution. Weintek CODESYS SoftPLC now supports Profinet IO Master! Profinet is currently the most popular industrial communication protocol in the world, leading the Ethernet-based market with a 23% share. With this update, Weintek joins the ranks of fully integrated, high-performance solutions for modern automation. What does this mean in practice? A single HMI + PLC platform that reduces the need for additional controllers or gateways. Seamless integration with Profinet IO devices. Real-time, deterministic communication — all within CODESYS. Read the full story here 👉 lnkd.in/dDuRcUDC

Bill Jones

Works for Machine Tool Importer, Distributor/Integrator.

I would go mits with the weintek. I would prefer rockwell myself for the PLC. Mitsubishi is not like rockwell meaning you will need to get used to it but I would prefer it over siemens. The software should be cheaper. The whole suite of mitsubishi software PLC and HMI Is like $500. If you have a distributor near you they should support you. You should require the software to be open to you after buyoff.
I would go mits with the weintek. I would prefer rockwell myself for the PLC. Mitsubishi is not like rockwell meaning you will need to get used to it but I would prefer it over siemens. The software should be cheaper. The whole suite of mitsubishi software PLC and HMI Is like $500. If you have a distributor near you they should support you. You should require the software to be open to you after buyoff.

Jimmy DiTraglia

Owner - JD Controls LLC | Automation Controls Engineer

I've only programmed a Mitsubishi PLC one time and it was a long time ago. At that time, the user interface was absolutely horrid. Hopefully they've improved since then. As for Weintek, I'm really a fan of what they're doing. I've got 2 Weintek HMIs here in my lab. One with Codesys. Is Codesys not an option for the PLC code? That's way easier to access and modify as it's a free download. Weinteks HMI software is also free. They make HMIs that run Codesys for just a $99 activation cost. So you don't need an extra piece of hardware for a PLC. It all lives on the HMI. If you've got questions about the Codesys and Weintek option feel free to message me.
I've only programmed a Mitsubishi PLC one time and it was a long time ago. At that time, the user interface was absolutely horrid. Hopefully they've improved since then. As for Weintek, I'm really a fan of what they're doing. I've got 2 Weintek HMIs here in my lab. One with Codesys. Is Codesys not an option for the PLC code? That's way easier to access and modify as it's a free download. Weinteks HMI software is also free. They make HMIs that run Codesys for just a $99 activation cost. So you don't need an extra piece of hardware for a PLC. It all lives on the HMI. If you've got questions about the Codesys and Weintek option feel free to message me.

Eric Seme

CEO @ Fireball Industries

I can speak to every hardware you mentioned. Mitsubishi is a good plc and their drives are nice. Siemens is a fully integrated hardware stack. But dollar for dollar the best option is the weintek panel with codesys.
I can speak to every hardware you mentioned. Mitsubishi is a good plc and their drives are nice. Siemens is a fully integrated hardware stack. But dollar for dollar the best option is the weintek panel with codesys.

Steve Myres

Owner, Automated Control Solutions LLC

Mitsu isn't fit to carry Siemens' briefcase. On the HMI side, I'd take Weintek over Siemens. Siemens' strong point is PLCs and drives.
Mitsu isn't fit to carry Siemens' briefcase. On the HMI side, I'd take Weintek over Siemens. Siemens' strong point is PLCs and drives.